4 Quick and Easy Ways to Make a Wonderful Fireplace with Peel and Stick Fireplace Tile

A fireplace in your home can add a luxurious touch to the decor. A wide variety of styles and designs can be found on the market that can be used to enhance a fireplace. As you apply peel and stick fireplace tile, you must take note of a few technical considerations. Because anyone can use these tiles, it is crucial to read all instructions before applying them to the walls. It will prevent the tiles from being wasted. However, here are some tips to help you complete this remarkable feature, as well as how a fireplace and stick tile or wood burner differs from a typical flooring.

Illusso offers you the best peel and stick tiles collection in Los Angeles

 

How Do You Tile Around Fireplaces?

When you prefer your fireplace to become the central element of your space, the pattern and tiles you select for your fireplace should correspond to the color palette and overall picture you desire to achieve. Most people associate it with modern rural, classic Victorian, and contemporary geometric materials. The peel and stick fireplace tiles with basic linear patterns are harmonious with the current trendy fireplace designs. The monotone pattern motif provides a more attractive appearance to the fireplace. Peel and stick tiles with glossy mosaic tiles offer houses a modern elegance appeal. Peel and stick fireplace tiles with dark marble and granite are fantastic for giving rooms a premium feel.

Is It Possible to Use Peel and Stick Fireplace Tiles?

Sure. We can use peel and stick fireplace tiles for the fireplace because they are resistant to heat. Most tiles are safe to install if the heating element is far more than 20 km away. However, metal peel and stick tiles should be used. As a result of its thickness, this product functions similarly as a fire-resistant block, collecting energy and not letting it pass to the exterior. As advised, the tile should be 14 cm away from the direct heat source. In addition, tiles may break if they are too close to the heating element, and they may discolor over time, reducing the attractiveness of the fireplace.

You can upgrade kitchen backsplashes and fireplaces with our thicker and more colorful metal peel and stick tiles.

In addition, the process of tiling a fireplace is not very different from that of tiling a wall or floor. Yes, peel and stick aluminum composite tiles are simpler than cement-based tiles. When installing vertical surfaces, it is vital to use the best adhesive. At Illusso, we use the best glue in the Peel & Stick industry to ensure you receive the best results.

Is It Profitable to Invest in Peel and Stick Fireplace Tiles?

Tiles adhered to the wall with peel and stick adhesive are durable. The type of adhesive and tile composition determine how long the tiles remain on the wall. A suitable adhesive and a good tile composition result in positive outcomes. It may drop and cause damage to the wall if it is overly hydrated, which can affect how well it adheres to the wall.

Scroll up and down Illusso’s collection of metall peel and stick tiles

Why Is Peel-and-Stick Fireplace Tile the Most Outstanding Choice, Particularly for Renters?

If you need a quick progress recap at a low cost, peel-and-stick fireplace tiles are an excellent option. In most circumstances, renters must leave their houses; they can use inexpensive tiles available in local markets for a reasonable median cost. These tiles are ideal for renters because they are made from a detachable material that can be replaced as needed at any time. In addition, they are much easier to put up on the wall than conventional tiles, which can be time-consuming and expensive to make (e.g., mortar, grout, tile spacers, and skilled labor). When you use peel-and-stick tiles, all you have to do is gauge the area, remove the backing, and adhere the panels to the wall.

When it comes to sticking peel-and-stick fireplace tiles, no special skills are required. If we are planning to decorate our wall with cement tiles, we will need expert architects, skilled workers, mortar, grout, tile spacers, and all the essential tools. However, if you want to decorate your wall or fireplace yourself, you can do so. To apply peel-and-stick fireplace tiles, first, clean the surface. The scrape of any dirt from the border with soap and water, then allow it to dry. Ensure that you take careful note of all the fireplace’s dimensions. Using a box cutter and a ruler when cutting the components, you’ll have an easier time. Then peel and stick the backsplash to the wall, taking off more of the back sheet as you go. Level the area with a credit or debit card or ruler, and that’s all there is to it; you don’t have to wait for the grout to set or remove any grout.

Take the tips below into consideration if you’re planning on putting peel and stick fireplace tile yourself.

• Please do not attempt to move the tiles once they have been set.
• If you’re planning to repaint or prepare the walls of your fireplace, do it after it’s been installed.
• You didn’t expect it to appear precisely as tiles.

 

In this scenario, the cost of the tiles would not be reduced if you are concerned about the quality. Higher-quality packages might cost up to $70 per square foot. On the other hand, Renter-friendly tiles are susceptible to breaking apart in high-moisture environments, while peel and stick fireplace tiles are perfectly acceptable for use on fireplaces.

You can decorate your room and have DIY fun with peel-and-stick fireplace tiles because they are heat resistant and have a sturdy adhesive backing.

The peel and stick fireplace tiles are innovative and one-of-a-kind items that will make your life easier. With ease, the tile adhesives can be applied to preexisting panels or flat walls.

How To Install Peel And Stick Tiles Efficiently: 9 Quick And Easy Ways

How to Install Peel and Stick Fireplace Tile Around a Fireplace

What you’ll require:

It is better to use peel and stick fireplace tiles for this project.

• Tape measure
• Pen
• Cutting board vs. cutting mat
• A long ruler or a straight edge
• Knife for everyday use
• Caulk + caulk brush in white

How to Transform a Fireplace with Peel and Stick Fireplace Tile

STEP 1: Decide on a beginning point.

Pick a beginning point. We needed our artwork to be front and middle on the flat area of the fireplace surrounding. Therefore we selected upfront and center.

STEP 2: Remove the peelings and adhere them to the board.

Remove the tile’s backing and push it into position.

• You’ll have some flexible space here, but it won’t be much. The adhesive is incredibly clingy.
• Once everything is in position, push it down.
• Then take the next tile, spin it to fit the design, and do it again.
• We did notice some variation in the design from tile to tile, so make sure you TEST them first before removing the backing off.
• putting down peel-and-stick tile on a fireplace

STEP 3: Do it again.

Continue until all of the surfaces have been coated. Some parts may have to be trimmed, which is simple to do with a knife blade (see detailed instructions below).

STEP 4: Seal the outer edges with caulk.

Lastly, we used white caulk around the edges for a tidy finish. It is an additional step, but it’s something you’d accomplish with natural tile, so I think it’s a great touch!

Visit how to install peel and stick fireplace tile

Illusso Peel and Stick Fireplace Tiles: How to Make Them

Cutting these sticky tiles is relatively simple!

• The most challenging part is gauging your area, correctly aligning the tile, and noting where you have to cut.
• The tile should next be placed on a cutting surface. Although we have a cutting mat, a cutting board would suffice. Choose something you don’t mind being cut apart.
• Draw a perfect line with a straight edge, such as a ruler, following your defined line. Trim along the straight edge of the tile with the knife.
• Your blade may leap at first, but you’ll get the hang of it. If you can make a trial cut, that’s fantastic.
• The best method was to tip the knife down at a 45-degree angle into the straight edge.
• The sliced section of the tile can then be snapped away from the rest of the tile.
• Press yourself against the wall and stay there.

Our professionals in Illusso are ready to help you with a high-end look in your house

 

References

Fireplace Remodel Ideas Using Peel And Stick Tile.  (2019, October 14). Lantern Lane
https://www.lanternlanedesigns.com/fireplace-makeover-using-peel-and-stick-tile/

Smart Tiles DIY Fireplace Makeover. (2018, December 03). Judy Dill
https://lifeisbetterathome.com/2018/12/03/smart-tiles-diy-fireplace-makeover/

Peel and Stick Tile Fireplace Ideas. (2021, May 05). Clever Mosaics
https://clevermosaics.com/peel-and-stick-tile-fireplace-ideas/

DIY : How to Use Peel & Stick Tile. (2020, May 01). Dreaming of Home Making
https://dreamingofhomemaking.com/diy-how-to-use-peel-stick-tile/